Pellet stove P10 AIR


Nominal heat output: 10 kW
Dimensions (W x D x H): 52x58x112 cm
Flue gases exhaust: Ø 80 mm



SENKO pellet stoves are used for heating residential spaces and/or as central heating and at the same time they can be a decorative element in every ambience. Fan blows warm air from the stove to the room through special grids on the front side of the stove. The second fan is leading the primary air to the firebox and at the same time flue gases are lead from the firebox to the chimney. SENKO pellet stoves are distinguished by their high efficiency (91-96%) as well as a very low environmental pollution level. They are designed and produced down to the last detail in order to satisfy, in the best way possible, all consumers’ needs regarding functionality and safety.


Technical information

Nominal heat output

10 kW

- boiler

- room

10,2 kW

Amount of water in boiler


125 kg

Fuel consumption at nominal power*

2,3 kg/h*

Tank capacity

25 kg

Primary air intake

Ø 50 mm

Required flue draught

12 Pa

Efficiency at nominal power

90,85 %

Supply voltage and frequency

230 V / 50 Hz

Air regulation - primary


Air regulation - secundary


Certified according to standard

EN 14785


PC-2, PC-3, PC-7

NOTE: The technical data are related to the use of wood pellets with quality ENplus-A1, net calorific value 4,9 kWh/kg.
* changeable data, may vary depending on the type of pellets used.




Download manual

Povezani proizvodi